* Linux 2.6.32.

svn path=/nixpkgs/branches/kernel-config/; revision=18932

2 files changed, 246 insertions, 0 deletions

diff --git a/pkgs/os-specific/linux/kernel/linux-2.6.32.nix b/pkgs/os-specific/linux/kernel/linux-2.6.32.nix
new file mode 100644
index 000000000000..40f0c6fdf2c0
--- /dev/null
+++ b/pkgs/os-specific/linux/kernel/linux-2.6.32.nix
@@ -0,0 +1,212 @@
+args @ {stdenv, fetchurl, userModeLinux ? false, ...}:
+
+import ./generic.nix (
+
+  rec {
+    version = "2.6.32";
+  
+    src = fetchurl {
+      url = "mirror://kernel/linux/kernel/v2.6/linux-${version}.tar.bz2";
+      sha256 = "0kjhnkf2ldivagczs16q49zm2lr3khh01pqrlsc7sh5qh1npi6ah";
+    };
+
+    features.iwlwifi = true;
+ 
+    config =
+      ''
+        # Don't include any debug features.
+        DEBUG_KERNEL n
+
+        # Support drivers that need external firmware.
+        STANDALONE n
+
+        # Make /proc/config.gz available.
+        IKCONFIG_PROC y
+
+        # Optimize with -O2, not -Os.
+        CC_OPTIMIZE_FOR_SIZE n
+
+        # Virtualisation (KVM, Xen...).
+        PARAVIRT_GUEST y
+        KVM_CLOCK y
+        KVM_GUEST y
+        XEN y
+
+        # We need 64 GB (PAE) support for Xen guest support.
+        HIGHMEM64G? y
+
+        # Enable the kernel's built-in memory tester.
+        MEMTEST y
+
+        # Include the CFQ I/O scheduler in the kernel, rather than as a
+        # module, so that the initrd gets a good I/O scheduler.
+        IOSCHED_CFQ y
+
+        # Disable some expensive (?) features.
+        FTRACE n
+        KPROBES n
+        NUMA? n
+        PM_TRACE_RTC n
+
+        # Enable various subsystems.
+        ACCESSIBILITY y # Accessibility support
+        AUXDISPLAY y # Auxiliary Display support
+        DONGLE y # Serial dongle support
+        HIPPI y
+        MTD_COMPLEX_MAPPINGS y # needed for many devices
+        NET_POCKET y # enable pocket and portable adapters
+        SCSI_LOWLEVEL y # enable lots of SCSI devices
+        SCSI_LOWLEVEL_PCMCIA y
+        SPI y # needed for many devices
+        SPI_MASTER y
+        WAN y
+
+        # Networking options.
+        IP_PNP n
+        IPV6_PRIVACY y
+        NETFILTER_ADVANCED y
+        IP_VS_PROTO_TCP y
+        IP_VS_PROTO_UDP y
+        IP_VS_PROTO_ESP y
+        IP_VS_PROTO_AH y
+        IP_DCCP_CCID3 n # experimental
+        CLS_U32_PERF y
+        CLS_U32_MARK y
+
+        # Wireless networking.
+        IPW2100_MONITOR y # support promiscuous mode
+        IPW2200_MONITOR y # support promiscuous mode
+        IWLWIFI_LEDS? y
+        IWLWIFI_SPECTRUM_MEASUREMENT y
+        IWL3945_SPECTRUM_MEASUREMENT y
+        IWL4965 y # Intel Wireless WiFi 4965AGN
+        IWL5000 y # Intel Wireless WiFi 5000AGN
+        HOSTAP_FIRMWARE y # Support downloading firmware images with Host AP driver
+        HOSTAP_FIRMWARE_NVRAM y
+
+        # Some settings to make sure that fbcondecor works - in particular,
+        # disable tileblitting and the drivers that need it.
+
+        # Enable various FB devices.
+        FB y
+        FB_EFI y
+        FB_NVIDIA_I2C y # Enable DDC Support
+        FB_RIVA_I2C y
+        FB_ATY_CT y # Mach64 CT/VT/GT/LT (incl. 3D RAGE) support
+        FB_ATY_GX y # Mach64 GX support
+        FB_SAVAGE_I2C y
+        FB_SAVAGE_ACCEL y
+        FB_SIS_300 y
+        FB_SIS_315 y
+        FB_3DFX_ACCEL y
+        FB_GEODE y
+
+        # Sound.
+        SND_AC97_POWER_SAVE y # AC97 Power-Saving Mode
+        SND_HDA_INPUT_BEEP y # Support digital beep via input layer
+        SND_USB_CAIAQ_INPUT y
+        PSS_MIXER y # Enable PSS mixer (Beethoven ADSP-16 and other compatible)
+
+        # USB serial devices.
+        USB_SERIAL_GENERIC y # USB Generic Serial Driver
+        USB_SERIAL_KEYSPAN_MPR y # include firmware for various USB serial devices
+        USB_SERIAL_KEYSPAN_USA28 y
+        USB_SERIAL_KEYSPAN_USA28X y
+        USB_SERIAL_KEYSPAN_USA28XA y
+        USB_SERIAL_KEYSPAN_USA28XB y
+        USB_SERIAL_KEYSPAN_USA19 y
+        USB_SERIAL_KEYSPAN_USA18X y
+        USB_SERIAL_KEYSPAN_USA19W y
+        USB_SERIAL_KEYSPAN_USA19QW y
+        USB_SERIAL_KEYSPAN_USA19QI y
+        USB_SERIAL_KEYSPAN_USA49W y
+        USB_SERIAL_KEYSPAN_USA49WLC y
+
+        # Filesystem options - in particular, enable extended attributes and
+        # ACLs for all filesystems that support them.
+        EXT2_FS_XATTR y # Ext2 extended attributes
+        EXT2_FS_POSIX_ACL y # Ext2 POSIX Access Control Lists
+        EXT2_FS_SECURITY y # Ext2 Security Labels
+        EXT2_FS_XIP y # Ext2 execute in place support
+        EXT4_FS_POSIX_ACL y
+        EXT4_FS_SECURITY y
+        REISERFS_FS_XATTR y
+        REISERFS_FS_POSIX_ACL y
+        REISERFS_FS_SECURITY y
+        JFS_POSIX_ACL y
+        JFS_SECURITY y
+        XFS_QUOTA y
+        XFS_POSIX_ACL y
+        XFS_RT y # XFS Realtime subvolume support
+        OCFS2_DEBUG_MASKLOG n
+        OCFS2_FS_POSIX_ACL y
+        BTRFS_FS_POSIX_ACL y
+        UBIFS_FS_XATTR y
+        UBIFS_FS_ADVANCED_COMPR y
+        NFSD_V2_ACL y
+        NFSD_V3 y
+        NFSD_V3_ACL y
+        NFSD_V4 y
+        CIFS_XATTR y
+        CIFS_POSIX y
+
+        # Security related features.
+        STRICT_DEVMEM y # Filter access to /dev/mem
+        SECURITY_SELINUX_BOOTPARAM_VALUE 0 # disable SELinux by default
+
+        # Misc. options.
+        8139TOO_8129 y
+        8139TOO_PIO n # PIO is slower
+        AIC79XX_DEBUG_ENABLE n
+        AIC7XXX_DEBUG_ENABLE n
+        AIC94XX_DEBUG n
+        B43_PCMCIA y
+        BLK_DEV_BSG n
+        BLK_DEV_CMD640_ENHANCED y # CMD640 enhanced support
+        BLK_DEV_IDEACPI y # IDE ACPI support
+        BLK_DEV_INTEGRITY y
+        BSD_PROCESS_ACCT_V3 y
+        BT_HCIUART_BCSP y
+        BT_HCIUART_H4 y # UART (H4) protocol support
+        BT_HCIUART_LL y
+        BT_RFCOMM_TTY y # RFCOMM TTY support
+        CPU_FREQ_DEBUG n
+        CRASH_DUMP n
+        DMAR? n # experimental
+        DVB_DYNAMIC_MINORS y # we use udev
+        FUSION y # Fusion MPT device support
+        IDE_GD_ATAPI y # ATAPI floppy support
+        IRDA_ULTRA y # Ultra (connectionless) protocol
+        JOYSTICK_IFORCE_232 y # I-Force Serial joysticks and wheels
+        JOYSTICK_IFORCE_USB y # I-Force USB joysticks and wheels
+        JOYSTICK_XPAD_FF y # X-Box gamepad rumble support
+        JOYSTICK_XPAD_LEDS y # LED Support for Xbox360 controller 'BigX' LED
+        KALLSYMS_EXTRA_PASS n
+        LDM_PARTITION y # Windows Logical Disk Manager (Dynamic Disk) support
+        LEDS_TRIGGER_IDE_DISK y # LED IDE Disk Trigger
+        LOGIRUMBLEPAD2_FF y # Logitech Rumblepad 2 force feedback
+        LOGO n # not needed
+        MEDIA_ATTACH y
+        MEGARAID_NEWGEN y
+        MICROCODE_AMD y
+        MODVERSIONS y
+        MOUSE_PS2_ELANTECH y # Elantech PS/2 protocol extension
+        MTRR_SANITIZER y
+        NET_FC y # Fibre Channel driver support
+        PCI_LEGACY y
+        PPP_MULTILINK y # PPP multilink support
+        REGULATOR y # Voltage and Current Regulator Support
+        SCSI_LOGGING y # SCSI logging facility
+        SERIAL_8250 y # 8250/16550 and compatible serial support
+        SLIP_COMPRESSED y # CSLIP compressed headers
+        SLIP_SMART y
+        THERMAL_HWMON y # Hardware monitoring support
+        USB_DEBUG n
+        USB_EHCI_ROOT_HUB_TT y # Root Hub Transaction Translators
+        X86_CHECK_BIOS_CORRUPTION y
+        X86_MCE y
+      '';
+  }
+
+  // args
+)
diff --git a/pkgs/top-level/all-packages.nix b/pkgs/top-level/all-packages.nix
index cb1bc81e8712..dbe6b5605725 100644
--- a/pkgs/top-level/all-packages.nix
+++ b/pkgs/top-level/all-packages.nix
@@ -5529,6 +5529,40 @@ let
   kernel_2_6_31_zen = kernel_2_6_31_zen7;
   kernel_2_6_31_zen_bfs = kernel_2_6_31_zen7_bfs;
 
+  kernel_2_6_32 = makeOverridable (import ../os-specific/linux/kernel/linux-2.6.32.nix) {
+    inherit fetchurl stdenv perl mktemp module_init_tools;
+    kernelPatches = [
+      { name = "fbcondecor-0.9.6-2.6.31.2";
+        patch = fetchurl {
+          url = http://dev.gentoo.org/~spock/projects/fbcondecor/archive/fbcondecor-0.9.6-2.6.31.2.patch;
+          sha256 = "1avk0yn0y2qbpsxf31r6d14y4a1mand01r4k4i71yfxvpqcgxka9";
+        };
+        extraConfig =
+          ''
+            FB_CON_DECOR y
+
+            # fbcondecor is picky about some other settings.
+            FB y
+            FB_TILEBLITTING n
+            FB_MATROX n
+            FB_S3 n
+            FB_VT8623 n
+            FB_ARK n
+            FB_CFB_FILLRECT y
+            FB_CFB_COPYAREA y
+            FB_CFB_IMAGEBLIT y
+            FB_VESA y
+            FRAMEBUFFER_CONSOLE y
+          '';
+        features = { fbConDecor = true; };
+      }
+      { name = "sec_perm-2.6.24";
+        patch = ../os-specific/linux/kernel/sec_perm-2.6.24.patch;
+        features = { secPermPatch = true; };
+      }
+    ];
+  };
+
   /* Kernel modules are inherently tied to a specific kernel.  So
      rather than provide specific instances of those packages for a
      specific kernel, we have a function that builds those packages